eprintid: 2237 rev_number: 9 eprint_status: archive userid: 2 dir: disk0/00/00/22/37 datestamp: 2024-04-30 22:49:37 lastmod: 2024-04-30 22:49:38 status_changed: 2024-04-30 22:49:37 type: article metadata_visibility: show creators_name: Bahena, Adolfo creators_name: De León Aldaco, Susana Estefany creators_name: Alquicira, Jesus title: Simulation for a Dual Inverter Feeding a Three-Phase Open-End Winding Induction Motor: A Comparative Study of PWM Techniques ispublished: pub subjects: uneat_eng divisions: uninimx_produccion_cientifica full_text_status: public keywords: dual inverter, open-end winding induction motor, PWM techniques abstract: The high level of electrical energy consumption of induction motors widely used in the industrial sector has increased interest in this sector to search for strategies to improve energy efficiency in order to save energy. During the last decade, the use of power inverters for speed control system applications in induction motors has increased considerably. Its main advantage is its capacity to improve energy efficiency, which depends mainly on the modulation technique used. In this paper, a comparative analysis of the output voltage behaviour of a three-phase dual inverter using an open-end winding induction motor was performed. For the comparative analysis, four modulation techniques: 1. Sinusoidal Pulse Width Modulation (SPWM), 2. Alternative Phase Opposite Disposition Pulse Width Modulation (APOD-PWM), 3. Third Harmonic Injection Pulse Width Modulation (THI-PWM), and 4. Carrier Based Space Vector Pulse Width Modulation (CB-SVPWM), were applied. The comparison of the simulation results was carried out using the PSim software. date: 2020 publication: European Journal of Electrical Engineering volume: 22 number: 1 pagerange: 13-21 id_number: doi:10.18280/ejee.220102 refereed: TRUE issn: 21033641 official_url: http://doi.org/10.18280/ejee.220102 access: open language: en citation: Artículo Materias > Ingeniería Universidad Internacional Iberoamericana México > Investigación > Artículos y libros Abierto Inglés The high level of electrical energy consumption of induction motors widely used in the industrial sector has increased interest in this sector to search for strategies to improve energy efficiency in order to save energy. During the last decade, the use of power inverters for speed control system applications in induction motors has increased considerably. Its main advantage is its capacity to improve energy efficiency, which depends mainly on the modulation technique used. In this paper, a comparative analysis of the output voltage behaviour of a three-phase dual inverter using an open-end winding induction motor was performed. For the comparative analysis, four modulation techniques: 1. Sinusoidal Pulse Width Modulation (SPWM), 2. Alternative Phase Opposite Disposition Pulse Width Modulation (APOD-PWM), 3. Third Harmonic Injection Pulse Width Modulation (THI-PWM), and 4. Carrier Based Space Vector Pulse Width Modulation (CB-SVPWM), were applied. The comparison of the simulation results was carried out using the PSim software. metadata Bahena, Adolfo; De León Aldaco, Susana Estefany y Alquicira, Jesus mail SIN ESPECIFICAR (2020) Simulation for a Dual Inverter Feeding a Three-Phase Open-End Winding Induction Motor: A Comparative Study of PWM Techniques. European Journal of Electrical Engineering, 22 (1). pp. 13-21. ISSN 21033641 document_url: http://repositorio.unini.edu.mx/id/eprint/2237/1/22.01_02.pdf