Documentos donde el Autor es "Breñosa, Jose"

2025

Artículo Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Fundación Universitaria Internacional de Colombia > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros
Universidad Internacional Iberoamericana Puerto Rico > Investigación > Producción Científica
Universidad Internacional do Cuanza > Investigación > Producción Científica Abierto Inglés Cleaning and inspection of pipelines and gun barrels are crucial for ensuring safety and integrity to extend their lifespan. Existing automatic inspection approaches lack high robustness, as well as portability, and have movement restrictions and complexity. This study presents the design and development of a scalable, comprehensive automated inspection, cleaning, and evaluation mechanism (CAICEM) for large-sized pipelines and barrels with diameters in the range of 105 mm–210 mm. The proposed system is divided into electrical and mechanical assemblies that are independently designed, tested, fabricated, integrated, and controlled with industrial grid controllers and processors. These actuators are suitably programmed to provide the desired actions through toggle switches on a simple housing subassembly. The stress analysis and material specifications are obtained using ANSYS to ensure robustness and practicability. Later, on-ground testing and optimization are performed before industrial prototyping. The inspection system of the proposed mechanism includes barrel-mounted and brush-mounted cameras with sensors utilized to keep track of the pipeline deposits and monitor user activity. The experimental results demonstrate that the proposed mechanism is cost-effective and achieves the desired objectives with minimum human efforts in the least possible time for both smooth and rifled large-diameter pipes and barrels. metadata Shafi, Imran; Khan, Imad; Breñosa, Jose; López Flores, Miguel Ángel; Martínez Espinosa, Julio César; Choi, Jin-Ghoo; Ashraf, Imran y Murray, Richard mail SIN ESPECIFICAR, SIN ESPECIFICAR, josemanuel.brenosa@uneatlantico.es, SIN ESPECIFICAR, ulio.martinez@unini.edu.mx, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR (2025) Scalable Comprehensive Automatic Inspection, Cleaning, and Evaluation Mechanism for Large‐Diameter Pipes. International Journal of Intelligent Systems, 2025 (1). ISSN 0884-8173

2024

Artículo Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Fundación Universitaria Internacional de Colombia > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros
Universidad Internacional Iberoamericana Puerto Rico > Investigación > Producción Científica
Universidad Internacional do Cuanza > Investigación > Producción Científica Abierto Inglés With the outbreak of the COVID-19 pandemic, social isolation and quarantine have become commonplace across the world. IoT health monitoring solutions eliminate the need for regular doctor visits and interactions among patients and medical personnel. Many patients in wards or intensive care units require continuous monitoring of their health. Continuous patient monitoring is a hectic practice in hospitals with limited staff; in a pandemic situation like COVID-19, it becomes much more difficult practice when hospitals are working at full capacity and there is still a risk of medical workers being infected. In this study, we propose an Internet of Things (IoT)-based patient health monitoring system that collects real-time data on important health indicators such as pulse rate, blood oxygen saturation, and body temperature but can be expanded to include more parameters. Our system is comprised of a hardware component that collects and transmits data from sensors to a cloud-based storage system, where it can be accessed and analyzed by healthcare specialists. The ESP-32 microcontroller interfaces with the multiple sensors and wirelessly transmits the collected data to the cloud storage system. A pulse oximeter is utilized in our system to measure blood oxygen saturation and body temperature, as well as a heart rate monitor to measure pulse rate. A web-based interface is also implemented, allowing healthcare practitioners to access and visualize the collected data in real-time, making remote patient monitoring easier. Overall, our IoT-based patient health monitoring system represents a significant advancement in remote patient monitoring, allowing healthcare practitioners to access real-time data on important health metrics and detect potential health issues before they escalate. metadata Islam, Md. Milon; Shafi, Imran; Din, Sadia; Farooq, Siddique; Díez, Isabel de la Torre; Breñosa, Jose; Martínez Espinosa, Julio César y Ashraf, Imran mail SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, josemanuel.brenosa@uneatlantico.es, ulio.martinez@unini.edu.mx, SIN ESPECIFICAR (2024) Design and development of patient health tracking, monitoring and big data storage using Internet of Things and real time cloud computing. PLOS ONE, 19 (3). e0298582. ISSN 1932-6203

2023

Artículo Materias > Biomedicina
Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Fundación Universitaria Internacional de Colombia > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros
Universidad Internacional Iberoamericana Puerto Rico > Investigación > Producción Científica
Universidad Internacional do Cuanza > Investigación > Producción Científica Abierto Inglés Objective This study aims to develop a lightweight convolutional neural network-based edge federated learning architecture for COVID-19 detection using X-ray images, aiming to minimize computational cost, latency, and bandwidth requirements while preserving patient privacy. Method The proposed method uses an edge federated learning architecture to optimize task allocation and execution. Unlike in traditional edge networks where requests from fixed nodes are handled by nearby edge devices or remote clouds, the proposed model uses an intelligent broker within the federation to assess member edge cloudlets' parameters, such as resources and hop count, to make optimal decisions for task offloading. This approach enhances performance and privacy by placing tasks in closer proximity to the user. DenseNet is used for model training, with a depth of 60 and 357,482 parameters. This resource-aware distributed approach optimizes computing resource utilization within the edge-federated learning architecture. Results The experimental results demonstrate significant improvements in various performance metrics. The proposed method reduces training time by 53.1%, optimizes CPU and memory utilization by 17.5% and 33.6%, and maintains accurate COVID-19 detection capabilities without compromising the F1 score, demonstrating the efficiency and effectiveness of the lightweight convolutional neural network-based edge federated learning architecture. Conclusion Existing studies predominantly concentrate on either privacy and accuracy or load balancing and energy optimization, with limited emphasis on training time. The proposed approach offers a comprehensive performance-centric solution that simultaneously addresses privacy, load balancing, and energy optimization while reducing training time, providing a more holistic and balanced solution for optimal system performance. metadata Alvi, Sohaib Bin Khalid; Nayyer, Muhammad Ziad; Jamal, Muhammad Hasan; Raza, Imran; de la Torre Diez, Isabel; Rodríguez Velasco, Carmen Lilí; Breñosa, Jose y Ashraf, Imran mail SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, carmen.rodriguez@uneatlantico.es, josemanuel.brenosa@uneatlantico.es, SIN ESPECIFICAR (2023) A lightweight deep learning approach for COVID-19 detection using X-ray images with edge federation. DIGITAL HEALTH, 9. ISSN 2055-2076

Artículo Materias > Biomedicina
Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Fundación Universitaria Internacional de Colombia > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros
Universidad Internacional Iberoamericana Puerto Rico > Investigación > Producción Científica
Universidad Internacional do Cuanza > Investigación > Producción Científica Abierto Inglés Artificial intelligence has made substantial progress in medicine. Automated dental imaging interpretation is one of the most prolific areas of research using AI. X-ray and infrared imaging systems have enabled dental clinicians to identify dental diseases since the 1950s. However, the manual process of dental disease assessment is tedious and error-prone when diagnosed by inexperienced dentists. Thus, researchers have employed different advanced computer vision techniques, and machine- and deep-learning models for dental disease diagnoses using X-ray and near-infrared imagery. Despite the notable development of AI in dentistry, certain factors affect the performance of the proposed approaches, including limited data availability, imbalanced classes, and lack of transparency and interpretability. Hence, it is of utmost importance for the research community to formulate suitable approaches, considering the existing challenges and leveraging findings from the existing studies. Based on an extensive literature review, this survey provides a brief overview of X-ray and near-infrared imaging systems. Additionally, a comprehensive insight into challenges faced by researchers in the dental domain has been brought forth in this survey. The article further offers an amalgamative assessment of both performances and methods evaluated on public benchmarks and concludes with ethical considerations and future research avenues. metadata Shafi, Imran; Fatima, Anum; Afzal, Hammad; Díez, Isabel de la Torre; Lipari, Vivian; Breñosa, Jose y Ashraf, Imran mail SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, vivian.lipari@uneatlantico.es, josemanuel.brenosa@uneatlantico.es, SIN ESPECIFICAR (2023) A Comprehensive Review of Recent Advances in Artificial Intelligence for Dentistry E-Health. Diagnostics, 13 (13). p. 2196. ISSN 2075-4418

Artículo Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros Abierto Inglés Ubiquitous data monitoring and processing with minimal latency is one of the crucial challenges in real-time and scalable applications. Internet of Things (IoT), fog computing, edge computing, cloud computing, and the edge of things are the spine of all real-time and scalable applications. Conspicuously, this study proposed a novel framework for a real-time and scalable application that changes dynamically with time. In this study, IoT deployment is recommended for data acquisition. The Pre-Processing of data with local edge and fog nodes is implemented in this study. The threshold-oriented data classification method is deployed to improve the intrusion detection mechanism’s performance. The employment of machine learning-empowered intelligent algorithms in a distributed manner is implemented to enhance the overall response rate of the layered framework. The placement of respondent nodes near the framework’s IoT layer minimizes the network’s latency. For economic evaluation of the proposed framework with minimal efforts, EdgeCloudSim and FogNetSim++ simulation environments are deployed in this study. The experimental results confirm the robustness of the proposed system by its improvised threshold-oriented data classification and intrusion detection approach, improved response rate, and prediction mechanism. Moreover, the proposed layered framework provides a robust solution for real-time and scalable applications that changes dynamically with time. metadata Aldribi, Abdulaziz; Singh, Aman y Breñosa, Jose mail SIN ESPECIFICAR, aman.singh@uneatlantico.es, josemanuel.brenosa@uneatlantico.es (2023) Edge of Things Inspired Robust Intrusion Detection Framework for Scalable and Decentralized Applications. Computer Systems Science and Engineering, 46 (3). pp. 3865-3881. ISSN 0267-6192

2022

Artículo Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Fundación Universitaria Internacional de Colombia > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros
Universidad Internacional Iberoamericana Puerto Rico > Investigación > Producción Científica
Universidad Internacional do Cuanza > Investigación > Producción Científica Abierto Inglés The fast expansion of ICT (information and communications technology) has provided rich sources of data for the analysis, modeling, and interpretation of human mobility patterns. Many researchers have already introduced behavior-aware protocols for a better understanding of architecture and realistic modeling of behavioral characteristics, similarities, and aggregation of mobile users. We are introducing the similarity analytical framework for the mobile encountering analysis to allow for more direct integration between the physical world and cyber-based systems. In this research, we propose a method for finding the similarity behavior of users’ mobility patterns based on location and time. This research was conducted to develop a technique for producing co-occurrence matrices of users based on their similar behaviors to determine their encounters. Our approach, named SAA (similarity analysis approach), makes use of the device info i.e., IP (internet protocol) and MAC (media access control) address, providing an in-depth analysis of similarity behaviors on a daily basis. We analyzed the similarity distributions of users on different days of the week for different locations based on their real movements. The results show similar characteristics of users with common mobility behaviors based on location and time to showcase the efficacy. The results show that the proposed SAA approach is 33% more accurate in terms of recognizing the user’s similarity as compared to the existing similarity approach. metadata Memon, Ambreen; Kilby, Jeff; Breñosa, Jose; Martínez Espinosa, Julio César y Ashraf, Imran mail SIN ESPECIFICAR, SIN ESPECIFICAR, josemanuel.brenosa@uneatlantico.es, ulio.martinez@unini.edu.mx, SIN ESPECIFICAR (2022) Analysis and Implementation of Human Mobility Behavior Using Similarity Analysis Based on Co-Occurrence Matrix. Sensors, 22 (24). p. 9898. ISSN 1424-8220

Artículo Materias > Biomedicina Universidad Europea del Atlántico > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros Abierto Inglés The authors have requested to update the original publication of this article. Duplicate text in the second and third paragraphs of page 5 should be deleted. Acknowledgments section should be removed. The original article has been corrected. metadata Montano, Isabel Herrera; Lafuente, Elena Presencio; Breñosa, Jose; Ortega-Mansilla, Arturo; Díez, Isabel de la Torre y Río-Solá, María Lourdes Del mail SIN ESPECIFICAR, SIN ESPECIFICAR, josemanuel.brenosa@uneatlantico.es, arturo.ortega@uneatlantico.es, SIN ESPECIFICAR, SIN ESPECIFICAR (2022) Correction to: Systematic Review of Telemedicine and eHealth Systems Applied to Vascular Surgery. Journal of Medical Systems, 47 (1). ISSN 1573-689X

Artículo Materias > Biomedicina Universidad Europea del Atlántico > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros Abierto Inglés Objective: The objective of this paper is to review and analyze the current state of telemedicine and ehealth in the field of vascular surgery. Methods: This paper collects the relevant information obtained after reviewing the articles related to telemedicine in vascular surgery, published from 2012 to 2022 contained in scientific databases. In addition, the results obtained are statistically studied based on various factors, such as the year of publication or the search engine. In this way, we obtain a complete vision of the current state of telemedicine in the field of vascular surgery. Results: After performing this search and applying selection criteria, 29 articles were obtained for subsequent study and discussion, of which 20 were published in the second half of the decade, representing 70% of the results. In the analysis carried out according to the search criteria used, it can be seen that using the word telemedicine we obtained 69% of the articles while with the criteria mHealth and eHealth we only obtained 22% and 9% of the results, respectively. It can be seen that the filter with the most potential content articles was “vascular surgery AND telemedicine”. In the analysis performed according to the search engine, it was observed that the Google Scholar database contains 93% of the articles found in the massive search and the relevant articles contained therein represent 52% of the total. Conclusion: An upward trend has been observed in recent years, with a clear increase in the number of publications and much lower figures in the first years. One aspect to highlight is that 47.8% of the articles analyzed focus only on postoperative treatment, which may be due to the help provided by telemedicine in detecting surgical site infections by sending images and videos, this being one of the most common postoperative complications. The analyzed works show the importance of telemedicine in vascular surgery and identify possible future lines of research. In the analysis carried out on the origin of the selected relevant papers, an important interest of the US in this topic is demonstrated since more than 50% of the research contains authors from this country, it is also observed that there is no research from Spain, so this research would be an initial step to determine the weaknesses of telemedicine in this field of medicine and a good opportunity to open a research gap in this branch. metadata Herrera Montano, Isabel; Presencio Lafuente, Elena; Breñosa, Jose; Ortega-Mansilla, Arturo; Torre Díez, Isabel de la y Río-Solá, María Lourdes Del mail SIN ESPECIFICAR, SIN ESPECIFICAR, josemanuel.brenosa@uneatlantico.es, arturo.ortega@uneatlantico.es, SIN ESPECIFICAR, SIN ESPECIFICAR (2022) Systematic Review of Telemedicine and eHealth Systems Applied to Vascular Surgery. Journal of Medical Systems, 46 (12). ISSN 1573-689X

Artículo Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Fundación Universitaria Internacional de Colombia > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros
Universidad Internacional Iberoamericana Puerto Rico > Investigación > Producción Científica
Universidad Internacional do Cuanza > Investigación > Producción Científica Abierto Inglés This paper presents the design, development, and testing of an IoT-enabled smart stick for visually impaired people to navigate the outside environment with the ability to detect and warn about obstacles. The proposed design employs ultrasonic sensors for obstacle detection, a water sensor for sensing the puddles and wet surfaces in the user’s path, and a high-definition video camera integrated with object recognition. Furthermore, the user is signaled about various hindrances and objects using voice feedback through earphones after accurately detecting and identifying objects. The proposed smart stick has two modes; one uses ultrasonic sensors for detection and feedback through vibration motors to inform about the direction of the obstacle, and the second mode is the detection and recognition of obstacles and providing voice feedback. The proposed system allows for switching between the two modes depending on the environment and personal preference. Moreover, the latitude/longitude values of the user are captured and uploaded to the IoT platform for effective tracking via global positioning system (GPS)/global system for mobile communication (GSM) modules, which enable the live location of the user/stick to be monitored on the IoT dashboard. A panic button is also provided for emergency assistance by generating a request signal in the form of an SMS containing a Google maps link generated with latitude and longitude coordinates and sent through an IoT-enabled environment. The smart stick has been designed to be lightweight, waterproof, size adjustable, and has long battery life. The overall design ensures energy efficiency, portability, stability, ease of access, and robust features. metadata Farooq, Muhammad Siddique; Shafi, Imran; Khan, Harris; Díez, Isabel De La Torre; Breñosa, Jose; Martínez Espinosa, Julio César y Ashraf, Imran mail SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, josemanuel.brenosa@uneatlantico.es, ulio.martinez@unini.edu.mx, SIN ESPECIFICAR (2022) IoT Enabled Intelligent Stick for Visually Impaired People for Obstacle Recognition. Sensors, 22 (22). p. 8914. ISSN 1424-8220

Artículo Materias > Biomedicina
Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Fundación Universitaria Internacional de Colombia > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros
Universidad Internacional Iberoamericana Puerto Rico > Investigación > Producción Científica
Universidad Internacional do Cuanza > Investigación > Producción Científica Abierto Inglés Mobility and low energy consumption are considered the main requirements for wireless body area sensor networks (WBASN) used in healthcare monitoring systems (HMS). In HMS, battery-powered sensor nodes with limited energy are used to obtain vital statistics about the body. Hence, energy-efficient schemes are desired to maintain long-term and steady connectivity of the sensor nodes. A sheer amount of energy is consumed in activities such as idle listening, excessive transmission and reception of control messages, packet collisions and retransmission of packets, and poor path selection, that may lead to more energy consumption. A combination of adaptive scheduling with an energy-efficient protocol can help select an appropriate path at a suitable time to minimize the control overhead, energy consumption, packet collision, and excessive idle listening. This paper proposes a region-based energy-efficient multipath routing (REMR) approach that divides the entire sensor network into clusters with preferably multiple candidates to represent each cluster. The cluster representatives (CRs) route packets through various clusters. For routing, the energy requirement of each route is considered, and the path with minimum energy requirements is selected. Similarly, end-to-end delay, higher throughput, and packet-delivery ratio are considered for packet routing. metadata Akbar, Shuja; Mehdi, Muhammad Mohsin; Jamal, M. Hasan; Raza, Imran; Hussain, Syed Asad; Breñosa, Jose; Martínez Espinosa, Julio César; Pascual Barrera, Alina Eugenia y Ashraf, Imran mail SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, josemanuel.brenosa@uneatlantico.es, ulio.martinez@unini.edu.mx, alina.pascual@unini.edu.mx, SIN ESPECIFICAR (2022) Multipath Routing in Wireless Body Area Sensor Network for Healthcare Monitoring. Healthcare, 10 (11). p. 2297. ISSN 2227-9032

Artículo Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros
Universidad Internacional Iberoamericana Puerto Rico > Investigación > Producción Científica Abierto Inglés This study involves a working limestone mine that supplies limestone to the cement factory. The two main goals of this paper are to (a) determine how long an operating mine can continue to provide the cement plant with the quality and quantity of materials it needs, and (b) explore the viability of combining some limestone from a nearby mine with the study mine limestone to meet the cement plant’s quality and quantity goals. These objectives are accomplished by figuring out the maximum net profit for the ultimate pit limit and production sequencing of the mining blocks. The issues were resolved using a branch-and-cut based sequential integer and mixed integer programming problem. The study mine can exclusively feed the cement plant for up to 15 years, according to the data. However, it was also noted that the addition of the limestone from the neighboring mine substantially increased the mine’s life (85 years). The findings also showed that, when compared with the production planning formulation that the company is now using, the proposed approach creates 10% more profit. The suggested method also aids in determining the desired desirable quality of the limestone that will be transported from the nearby mine throughout each production stage. metadata Joshi, Devendra; Chithaluru, Premkumar; Singh, Aman; Yadav, Arvind; Elkamchouchi, Dalia H.; Breñosa, Jose y Anand, Divya mail SIN ESPECIFICAR, SIN ESPECIFICAR, aman.singh@uneatlantico.es, SIN ESPECIFICAR, SIN ESPECIFICAR, josemanuel.brenosa@uneatlantico.es, divya.anand@uneatlantico.es (2022) An Optimized Open Pit Mine Application for Limestone Quarry Production Scheduling to Maximize Net Present Value. Mathematics, 10 (21). p. 4140. ISSN 2227-7390

Artículo Materias > Biomedicina
Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Fundación Universitaria Internacional de Colombia > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros
Universidad Internacional Iberoamericana Puerto Rico > Investigación > Producción Científica
Universidad Internacional do Cuanza > Investigación > Producción Científica Abierto Inglés Artificial intelligence has been widely used in the field of dentistry in recent years. The present study highlights current advances and limitations in integrating artificial intelligence, machine learning, and deep learning in subfields of dentistry including periodontology, endodontics, orthodontics, restorative dentistry, and oral pathology. This article aims to provide a systematic review of current clinical applications of artificial intelligence within different fields of dentistry. The preferred reporting items for systematic reviews (PRISMA) statement was used as a formal guideline for data collection. Data was obtained from research studies for 2009–2022. The analysis included a total of 55 papers from Google Scholar, IEEE, PubMed, and Scopus databases. Results show that artificial intelligence has the potential to improve dental care, disease diagnosis and prognosis, treatment planning, and risk assessment. Finally, this study highlights the limitations of the analyzed studies and provides future directions to improve dental care metadata Fatima, Anum; Shafi, Imran; Afzal, Hammad; Díez, Isabel De La Torre; Lourdes, Del Rio-Solá M.; Breñosa, Jose; Martínez Espinosa, Julio César y Ashraf, Imran mail SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, josemanuel.brenosa@uneatlantico.es, ulio.martinez@unini.edu.mx, SIN ESPECIFICAR (2022) Advancements in Dentistry with Artificial Intelligence: Current Clinical Applications and Future Perspectives. Healthcare, 10 (11). p. 2188. ISSN 2227-9032

Artículo Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros
Universidad Internacional do Cuanza > Investigación > Producción Científica Abierto Inglés To address the current pandemic, multiple studies have focused on the development of new mHealth apps to help in curbing the number of infections, these applications aim to accelerate the identification and self-isolation of people exposed to SARS-CoV-2, the coronavirus known to cause COVID-19, by being in close contact with infected individuals. The main objectives of this paper are: (1) Analyze the current status of COVID-19 apps available on the main virtual stores: Google Play Store and App Store for Spain, and (2) Propose a novel mobile application that allows interaction and doctor-patient follow-up without the need for real-time consultations (face-to-face or telephone). In this research, a search for eHealth and telemedicine apps related to Covid-19 was performed in the main online stores: Google Play Store and App Store, until May 2021. Keywords were entered into the search engines of the online stores and relevant apps were selected for study using a PRISMA methodology. For the design and implementation of the proposed app named COVINFO, the main weaknesses of the apps studied were taken into account in order to propose a novel and useful app for healthcare systems. The search yielded a total of 50 apps, of which 24 were relevant to this study, of which 23 are free and 54% are available for Android and iOS operating systems (OS). The proposed app has been developed for mobile devices with Android OS being compatible with Android 4.4 and higher. This app enables doctor-patient interaction and constant monitoring of the patient's progress without the need for calls, chats or face-to-face consultation in real time. This work addresses design and development of an application for the transmission of the user's symptoms to his regular doctor, based on the fact that only 16.6% of existing applications have this functionality. The COVINFO app offers a novel service: asynchronous doctor-patient communication, as well as constant monitoring of the patient’s condition and evolution. This app makes it possible to better manage the time of healthcare personnel and avoid overcrowding in hospitals, with the aim of preventing the collapse of healthcare systems and the spread of the coronavirus. metadata Herrera Montano, Isabel; Pérez Pacho, Javier; Gracia Villar, Santos; Aparicio Obregón, Silvia; Breñosa, Jose y de la Torre Díez, Isabel mail SIN ESPECIFICAR, SIN ESPECIFICAR, santos.gracia@uneatlantico.es, silvia.aparicio@uneatlantico.es, josemanuel.brenosa@uneatlantico.es, SIN ESPECIFICAR (2022) Descriptive Analysis of Mobile Apps for Management of COVID-19 in Spain and Development of an Innovate App in that field. Scientific Reports, 12 (1). ISSN 2045-2322

Artículo Materias > Biomedicina
Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Fundación Universitaria Internacional de Colombia > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros
Universidad Internacional Iberoamericana Puerto Rico > Investigación > Producción Científica
Universidad Internacional do Cuanza > Investigación > Producción Científica Abierto Español Patient care and convenience remain the concern of medical professionals and caregivers alike. An unconscious patient confined to a bed may develop fluid accumulation and pressure sores due to inactivity and deficiency of oxygen flow. Moreover, weight monitoring is crucial for an effective treatment plan, which is difficult to measure for bedridden patients. This paper presents the design and development of a smart and cost-effective independent system for lateral rotation, movement, weight measurement, and transporting immobile patients. Optimal dimensions and practical design specifications are determined by a survey across various hospitals. Subsequently, the proposed hoist-based weighing and turning mechanism is CAD-modeled and simulated. Later, the structural analysis is carried out to select suitable metallurgy for various sub-assemblies to ensure design reliability. After fabrication, optimization, integration, and testing procedures, the base frame is designed to mount a hydraulic motor for the actuator, a DC power source for self-sustenance, and lockable wheels for portability. The installation of a weighing scale and a hydraulic actuator is ensured to lift the patient for weight measuring up to 600 pounds or lateral turning of 80 degrees both ways. The developed system offers simple operating characteristics, allows for keeping patient weight records, and assists nurses in changing patients’ lateral positions both ways, comfortably massage patients’ backs, and transport them from one bed to another. Additionally, being lightweight offers reduced contact with the patient to increase the healthcare staff’s safety in pandemics; it is also height adjustable and portable, allowing for use with multiple-sized beds and easy transportation across the medical facility. The feedback from paramedics is encouraging regarding reducing labor-intensive nursing tasks, alleviating the discomfort of long-term bed-ridden patients, and allowing medical practitioners to suggest better treatment plans metadata Shafi, Imran; Farooq, Muhammad Siddique; De La Torre Díez, Isabel; Breñosa, Jose; Martínez Espinosa, Julio César y Ashraf, Imran mail SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, josemanuel.brenosa@uneatlantico.es, ulio.martinez@unini.edu.mx, SIN ESPECIFICAR (2022) Design and Development of Smart Weight Measurement, Lateral Turning and Transfer Bedding for Unconscious Patients in Pandemics. Healthcare, 10 (11). p. 2174. ISSN 2227-9032

2021

Artículo Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros Abierto Inglés The Internet of Things (IoT) has changed the worldwide network of people, smart devices, intelligent things, data, and information as an emergent technology. IoT development is still in its early stages, and numerous interrelated challenges must be addressed. IoT is the unifying idea of embedding everything. The Internet of Things offers a huge opportunity to improve the world’s accessibility, integrity, availability, scalability, confidentiality, and interoperability. However, securing the Internet of Things is a difficult issue. The IoT aims to connect almost everything within the framework of a common infrastructure. This helps in controlling devices and, will allow device status to be updated everywhere and at any time. To develop technology via IoT, several critical scientific studies and inquiries have been carried out. However, many obstacles and problems remain to be tackled in order to reach IoT’s maximum potential. These problems and concerns must be taken into consideration in different areas of the IoT, such as implementation in remote areas, threats to the system, development support, social and environmental impacts, etc. This paper reviews the current state of the art in different IoT architectures, with a focus on current technologies, applications, challenges, IoT protocols, and opportunities. As a result, a detailed taxonomy of IoT is presented here which includes interoperability, scalability, security and energy efficiency, among other things. Moreover, the significance of blockchains and big data as well as their analysis in relation to IoT, is discussed. This article aims to help readers and researchers understand the IoT and its applicability to the real world. metadata Kumar, Arun; Sharma, Sharad; Singh, Aman; Alwadain, Ayed; Choi, Bong-Jun; Breñosa, Jose; Ortega-Mansilla, Arturo y Goyal, Nitin mail SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, josemanuel.brenosa@uneatlantico.es, arturo.ortega@uneatlantico.es, SIN ESPECIFICAR (2021) Revolutionary Strategies Analysis and Proposed System for Future Infrastructure in Internet of Things. Sustainability, 14 (1). p. 71. ISSN 2071-1050

Artículo Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros
Universidad Internacional do Cuanza > Investigación > Producción Científica Abierto Inglés Currently, two-wheelers are the most popular mode of transportation, driven by the majority the people. Research by the World Health Organization (WHO) identifies that most two-wheeler deaths are caused due to not wearing a helmet. However, the advancement in sensors and wireless communication technology empowers one to monitor physical things such as helmets through wireless technology. Motivated by these aspects, this article proposes a wireless personal network and an Internet of Things assisted system for automating the ignition of two-wheelers with authorization and authentication through the helmet. The authentication and authorization are realized with the assistance of a helmet node and a two-wheeler node based on 2.4 GHz RF communication. The helmet node is embedded with three flex sensors utilized to experiment with different age groups and under different temperature conditions. The statistical data collected during the experiment are utilized to identify the appropriate threshold value through a t-test hypothesis for igniting the two-wheelers. The threshold value obtained after the t-test is logged in the helmet node for initiating the communication with the two-wheeler node. The pairing of the helmet node along with the RFID key is achieved through 2.4 GHZ RF communication. During real-time implementation, the helmet node updates the status to the server and LABVIEW data logger, after wearing the helmet. Along with the customization of hardware, a LABVIEW data logger is designed to visualize the data on the server side. metadata Gehlot, Anita; Singh, Rajesh; Kuchhal, Piyush; Kumar, Adesh; Singh, Aman; Alsubhi, Khalid; Ibrahim, Muhammad; Gracia Villar, Santos y Breñosa, Jose mail SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, santos.gracia@uneatlantico.es, josemanuel.brenosa@uneatlantico.es (2021) WPAN and IoT Enabled Automation to Authenticate Ignition of Vehicle in Perspective of Smart Cities. Sensors, 21 (21). p. 7031. ISSN 1424-8220

Artículo Materias > Ingeniería Universidad Europea del Atlántico > Investigación > Producción Científica
Universidad Internacional Iberoamericana México > Investigación > Artículos y libros
Universidad Internacional do Cuanza > Investigación > Producción Científica Abierto Inglés Background: To address the current pandemic, multiple studies have focused on the development of new mHealth applications to help curb the number of infections, these applications aim to accelerate the identification and self-isolation of people exposed to SARS-CoV- 2, the coronavirus known to cause COVID-19, by being in close contact with infected individuals. Objective: The main objectives of this paper are: 1)To analyze the current status of COVID-19 apps available the main virtual stores: Google Play Store and App Store, and 2)To propose a novel mobile application based on the limitations of the analyzed apps. Methods: The search for apps in this research was carried out in the main virtual stores: Google Play Store and App Store, until May 2021. After the analysis of the selected apps, a novel app is proposed whose main function will be the multiple transmission of information about the patient's symptoms from the application, without the need for phone calls or chat in real time. For its development, the flowchart shown in this session is followed. Results: The search yielded a total of 50 apps, of which 24 were relevant to this study. It is important to note that 23 of the apps analyzed are free. Of the total number of apps, 54% are available for Android and iOS operating systems. 50% of the apps have more than 5 thousand downloads. This means that Covid-19 related apps are in high demand among mobile device users today. The developed app is called COVINFO and its name comes from the union of the words COVID-19 and information, inserted in such a way that the user can get an idea of the app's functionality just by listening or reading the resulting name. The application has been created for mobile devices with Android operating system, being compatible with Android 4.4 and higher. Conclusions: Of the apps found, 37.5% only offer information about the virus and the necessary measures to avoid infection. During the analysis it was detected that 12.5% of the apps are focused on locating outbreaks and that none of them have been successful for the following reasons: not being interconnected to share data; and the request for access to the user's geolocation, generating distrust on the part of the user who, consequently, rejects them. This work addresses the development of an application for the transmission of the user's symptoms to his regular doctor, based on the fact that only 16.6% of the existing applications have this functionality. The COVINFO app offers a service that no other application on the market has: doctor-patient interaction without the need for calls or chat in real time for constant monitoring by the doctor of the patient's condition and evolution. metadata Herrera Montano, Isabel; Pérez Pacho, Javier; Gracia Villar, Santos; Aparicio Obregón, Silvia; Breñosa, Jose y de la Torre Díez, Isabel mail SIN ESPECIFICAR, SIN ESPECIFICAR, santos.gracia@uneatlantico.es, silvia.aparicio@uneatlantico.es, josemanuel.brenosa@uneatlantico.es, SIN ESPECIFICAR (2021) Analysis of mobile apps for information, prevention and monitoring of covid-19 and proposal of an innovative app in this field. JMIR Preprints. (En Evaluación)